Insertion Loss & Return Loss Tester (Type A)
Measures IL and RL of patch cords and connectors with automatic pass / fail judgment.
All products
Machines, instruments and transceivers for every station of the fiber-optic connector line. Filter by product category or process station, or search by name, model and specification.
55 products
Insertion Loss & Return Loss Tester (Type B)
Bench IL and RL verification for finished patch cords and assemblies.
Insertion Loss & Return Loss Tester (Type C)
Measures IL and RL of patch cords and connectors with automatic pass / fail judgment.
Insertion Loss & Return Loss Tester (Type D)
Measures IL and RL of patch cords and connectors with automatic pass / fail judgment.
400G / 800G / 1.6T MT-FA Automatic Test System
Measures IL, RL, isolation and polarity of MT-FA assemblies for 400G to 1.6T optical modules.
MAP900-IRLM Shuffle-box / SN-MT / MMC / Optical Backplane Test System
IL, RL and polarity testing for shuffle boxes, SN-MT, MMC and optical backplanes.
MPO Optical Test SystemsNew
MPO production testing, including the C2500D-MPO24 system and single-mode insertion-loss configurations.
Fiber End-Face 3D InterferometerNew
Non-contact 3D mapping of polished connector end faces.
Benchtop Fiber End-face Inspector (Type A)
Magnifies and analyzes connector end faces on the production line, detecting scratches, pits and contamination with clear…
Benchtop Fiber End-face Inspector (Type C)
Magnifies and analyzes connector end faces on the production line, detecting scratches, pits and contamination with clear…
HD Measuring MicroscopeNew
1080p60 video microscope with on-screen measurement tools.
Handheld Fiber Inspection Probe (Type A)
Inspects fiber connector end faces for scratches, dirt and defects, helping to keep connections clean and low-loss.
Handheld Fiber Inspection Probe (Type B)
Inspects fiber connector end faces for scratches, dirt and defects, helping to keep connections clean and low-loss.
Handheld OTDR
Locates fiber events such as splices, connectors, bends and breaks by measuring backscattered light, displaying the full trace of a…
Compact OTDR Launch Cable Box
A small, light launch fiber box for everyday OTDR testing and maintenance.
OTDR Launch Cable Box (Aluminum Case)
Enclosed launch fiber for OTDR measurements, in an aluminum case.
OTDR Launch Fiber Reel
Launch fiber in compact-ring and strapped storage-reel formats.
Rugged OTDR Launch Cable BoxNew
Launch and receive fiber in a sealed, crush-proof field case.
Tensile Testing MachineNew
Force, extension and deformation testing for cable, connectors and materials.
Fiber Connector Curing Oven
Dual-rail heating platform for batch fiber-connector curing.
Fiber Connector Curing Oven (Type C)
Cures epoxy in fiber connectors at controlled temperature, with uniform heating and multiple-position holders for batch production.
Fiber Connector Curing Oven (Type D)
Cures epoxy in fiber connectors at controlled temperature, with uniform heating and multiple-position holders for batch production.
Fiber Connector Curing Oven (Type E)
Cures epoxy in fiber connectors at controlled temperature, with uniform heating and multiple-position holders for batch production.
Intelligent Curing Oven with Touch ScreenNew
Touchscreen curing platform with a covered dual-rail connector fixture.
Mini Block Heater Curing Oven
Batch heat-curing for epoxy single-fiber connectors.
MPO Connector Curing Oven
Has dedicated holders for MPO/MTP ferrules, ensuring uniform curing for multi-fiber connector production.
MPO Curve Heating MachineNew
Recipe-driven, multi-segment heating for MPO connector curing.
MPO Fiber Optic Curing OvenNew
Programmable PID curing with uniform heat across multiple MPO positions.
Smart Curing Oven (Gold Series)
Provides digital temperature control and multiple connector positions for efficient batch curing.
Automatic Fiber Cable Cutting Machine
Measured feeding and automatic cutting for repeatable cable lengths.
Heavy-Duty Optical Cable Cutting MachineNew
Pay-off, tension control, metering, cutting and take-up for cable on extra-large drums.
Automatic Patch Cord Winding Machine
Coils fiber patch cords and small cables to a set number of turns and holds the coil ready for tying, saving labour on the packing line.
Bench Thermal Fiber Stripper
Heats and removes fiber coatings cleanly on the production line, for single or ribbon fibers.
Cable Stripping & Aramid Cutting MachineUpdated
Strip the jacket, trim aramid yarn and slit the sheath — in one automated cycle.
Electric Crimping Machine
Powered, repeatable crimping for connector sub-assemblies.
Pneumatic Crimping Machine
Air-driven crimping for consistent connector retention.
Automated Dispensing Machine
Controlled adhesive dispensing for connector and component assembly.
Automatic Desktop Dispensing Robot
A 3-axis benchtop robot that dispenses glue along programmed paths with high precision and repeatability.
Automatic Epoxy Injection MachineNew
Programmed X/Y/Z array dispensing into SC and LC ferrule tail holes.
Fiber Connector Polishing Machine (Corner Pressure) (Type A)
Balanced four-corner pressure for stable, high-yield connector polishing.
Fiber Connector Polishing Machine (Corner Pressure) (Type B)
Balanced four-corner pressure for stable, high-yield connector polishing.
Touch-screen Fiber Polishing Machine (Center Pressure) (Type A)
A dedicated finishing station between curing and end-face inspection.
Touch-screen Fiber Polishing Machine (Center Pressure) (Type B)
Center-pressure polishing with programmable recipes for MT / MPO and high-precision work.
Ultrasonic Cleaner
Tank cleaning for fixtures, parts and components between steps.
Fiber Laser Marking Machine
Uses a fiber laser to permanently mark text, logos, serial numbers and QR codes on connector housings, boots, labels and metal parts.
Epoxy Removal Device (Type A)
Removes cured epoxy beads from ferrule end faces before polishing, protecting the fiber and improving polishing yield.
Epoxy Removal Device (Type B)
Removes cured epoxy beads from ferrule end faces before polishing, protecting the fiber and improving polishing yield.
Fiber Optic Centrifuge
Remove trapped air from adhesive before it reaches the ferrule.
Fusion Splicer
Joins two optical fibers by electric-arc fusion with very low splice loss, using precise core alignment and automatic splice programs.
100G QSFP28 Transceiver
A hot-pluggable, four-channel optical module for 100G Ethernet.
400G QSFP-DD SR8 Transceiver
A hot-pluggable QSFP56 / QSFP-DD optical module for 200G / 400G links.
800G OSFP SR8 Transceiver
A hot-pluggable OSFP / QSFP-DD800 optical module for 800G links.
High-Speed UAV Fiber Payoff MachineNew
Precision winding and payoff for UAV fiber reels up to 50 km at 400 m/min.
UAV Fiber Spool — Type ANew
Streamlined fiber canister with a guided center payout nozzle.
UAV Fiber Spool — Type BNew
Fiber spool with an integrated electronics bay and interface module.
No products match. Clear a filter, or ask an engineer — we also source equipment beyond this catalogue.
Not sure which machine fits?
Send your connector types, cables and output targets. We reply with questions, then a configured proposal.